Analysis of Connector Mold Parts Forging Cooling Processing

   Connector mold parts forging processing from the final forging temperature cooling to room temperature is called the forging cooling process, it is one of the links in the production of forging cooling process. The connector mold parts forging cooling processing according to chemical composition, section size, raw material quality, the different cooling methods.If connector mold parts forging cooling processing is improper, light is forging deformation bending, surface hardness too high and not cutting, may also extend the production cycle; forging crack, flake is serious, the forgings. Cooling after forging of high alloy steel and large forging is very important. Forging cooling methods in common use, according to the cooling speed from fast to slow the sequence into air cooling, cooling, pit cooling (or box cold), grey(or cold), annealing furnace cooling.
  1) air cooling. The connector mold parts forging cooling processing in the shop on the ground, but not on the damp ground or metal plates, but also to prevent the draught, avoid forging cooling too fast and cracks, bending, deformation and other defects.
  2) stack cooling. The connector mold parts forging cooling processing after forging into stack cooling in still air.
  3) Keng (or cold boxcold). The connector mold parts forging cooling processing
 in the pit or in the box.
  4) grey (or cold). Yize connector mold parts forging cooling processing in the slag, lime and sand. The slag, lime or sand must be dry. General forging into slag,lime or sand temperature not lower than 500 ℃, forging around the slag, lime or sand thickness shall not be less than 80mm.
  5) furnace cooling. The connector mold parts forging cooling processing
 on slow cooling in the furnace. Forging furnace temperatureat 600~650 ℃, the minimum should not below 350 ℃. The furnace should be raised to 650 ℃ to be expected, because the temperature is favorable to the diffusion hydrogen. To be forging all into the furnace after furnace cooling by cooling specification. The general temperature not higher than 100~150 ℃. To avoid cold air into the furnace.
 6) annealing. This is to prevent the cooling heat treatment process of the white spot.

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_283.html， Reproduced please specify. xiaoyunone110

Core pins And Aleeves Noble Manufacture

  With the development of core pins and sleeves development, ultra precision core pins and sleeves noble manufacture with machining technology of machining accuracy higher than 1 μ m and collector, chemistry, ultrasonic, laser technology in machining with manufacturing in the mould has broad prospects. At present, machine tool manufacturers are keen to production for high speed machining center processing and specialized design, high-speed core pins and sleeves technology in America to reduce . Core pins and sleeves noble manufacture with this technology in Europe and Japan are also popular. In addition, by using cavity mould fully hardened is another important trend in the development of mold industry. With the rapid development of various new technologies have appeared, foreign core pins and sleeves processing system, the system is made up of the rational combination of machine tools, with accompanying positioning fixture or positioning plate, complete machines, CNC tool library and CNC flexible synchronization system, a real-time quality monitoring and control system. As can be seen from the development of die and mould industry is fierce walk, believe that the future development of mold manufacturing industry will be more quickly.

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_279.html， Reproduced please specify. xiaoyunone110

How to be along with the transition path in mold parts industry

   In China, how to be along with the transition path in mold parts industry? To understand the problem, China mold parts industry today, in the fierce competition in the market environment, trend of China mold parts industry production appeared Pyramid phenomenon. Firstly, the hardware mold parts industry leading role is not strong. Second, weak technological innovation ability of mold parts industry . Thirdly, mold parts industry market structure is too single, export dependence is too high.Fourth, brand construction has lagged behind, the lack of awareness and core competitiveness. Fifth, the lack of public platform service. Some of the original problems are constantly emerging, also more and more serious. For example, the low cost of mould, structure of product quality and technical content is not high, rough and so.

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_275.html， Reproduced please specify. xiaoyunone110

The Development of Connector Mold Parts Technology

   The rapid development of connector mold parts technology is to rely on the development of mold industries, the development of connector mold parts technology is also promoting a small aspect of China economic development, so that the development of connector mold parts industry and the economic development of a country is closely related to.
   China connector mold parts, the productivity level after years of continuous development, the connector mold parts technology either in production or in the technology are improved, the connector mold parts in our country with high quality and inexpensive advantage is gradually to replace imported stamping die. Yize connector mold parts is on high quality and inexpensive advantage to enter foreign markets, and the long-term cooperation, Germany, Japan, Italy, America, Israel, Singapore, Thailand, Malaysia and other countries and regions. This is also on the yize mould technology gains, yize mold has been increasing in recent years to innovate the technology of connector mold parts,  so in the production of stamping mould fittings at.

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_271.html， Reproduced please specify. xiaoyunone110

The Development of Precision Auto Mold Parts

  The development of precision auto mold parts demands about seven hundred billions of China automobile needs, motorcycle industry every year, but our country has a large-scale precision auto mold parts manufacturing capacity is far from enough, now covering high quality precision auto mold parts car in China.Therefore, the development of precision auto mold parts is for maximum precision auto fittings mold domestic manufacturers, improve the precision mold manufacturing capacity.
   Yize mold is the largest precision auto mold parts processing factory, precision auto mold parts is the most famous exports the highest rate of precision auto mold parts manufacturers, many customers are from all over the world.

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_267.html， Reproduced please specify. xiaoyunone110

Analysis of Mold Components Processing In China

   Analysis of the mold components processing in the CNC machine tool.
   Analysis of the mold components processing, to consider the blank material and type,mold components size, dimensional accuracy and surface roughness, parts of complicated shapes, the number of parts, heat treatment, machining parts for analysis, complete the part is machined material and the shape of the blank, the tool to set scheme. Most of the connector mold parts processing factory of up to consider fully from 3 aspects:
  Step1, Technical requirements to ensure parts; to improve productivity is advantageous economy is cost-effective.
  Step2, mold components processing analysis for relationship from the machine and the mold components production batch. Generally when the mold components not too complex, batch and hinge hours, should adopt the general machine tool; when the production batch is great to use special machine; in many varieties, small batch production situation, when the parts are complex when using CNC machine tool can obtain higher economic benefits.
  Step3, precision connector mold parts some of mold design, mold accessories customized or connector, use ordinary machine may be difficult to machining, the so-called process of structural difference. But the data processing machine, can be an easy job to achieve. So in the process of CNC technology analysis parts, need to rigorously evaluate the structure process. In order to give full play to the advantages of CNC machining, the parts must be considered when designing and CNC process design of contact, surface modeling, thin wall light, complicated in structure.


Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_263.html， Reproduced please specify. xiaoyunone110

Precision Core Pins And Sleeves Machning In Market Development

   Market demand is pulling a big factor in the development of precision core pins and sleeves  machining, though weakened the pulling effect of various types of precision core pins and sleeves  demand downstream industry on China mold industry, but with the development of China mold industry, promote the improvement of core pins and sleeves machning,China precision core pins and sleeves machning demand is gradually increasing, so precision core pins and sleeves market will become better and better. Automobile industry, electronics, electrical appliances, aerospace, new energy, IT, medical machinery, such as high-speed railway provides new opportunities in the market although the mold industry, but with the industry developing speed down, to mold the demand continues to slow down, resulting in slowing down the pace of development of our mould industry. But can not say the mold industry development is slow, will not continue to innovate yize mold development direction, so always make connector mold parts, resolutely to increase the precision of core pins and sleeves to contribute to the development of the market.

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_240.html， Reproduced please specify. xiaoyunone110

Precision Mold Parts Processing Factory

   What is the precision mold parts processing, as a precision mold parts processing factory, we can not avoid the precision mold processing. But what is the precision mold parts processing? Let me tell you something.
   Precision mold parts processing refers to the forming and billet tool processing , and to be accurate to do this work, because its precise, but also includes shearing mold. Typically, the mold has two parts of an upper side and a lower side. The steel plate is placed between the upper and the lower die, the material forming in the press under the action of the press, when opened, will be determined by the shape of the workpiece mold or remove the corresponding waste. Even electronic connector mold parts, to the dashboard of a workpiece. The progressive is to automatically put the workpiece moves from one position to another position, and forming part of the die set at the last station. Due to the very good , we do in precision mold parts processing, so as to form precision mold parts processing, ultra precision mold parts processing. Yize mold is a professional mold parts processing factory, make the goods, delivery is the best, can reach all your requirements, and we also can provide you a private custom precision mold parts processing, quality is the best, and precision mold parts we are export.
   Because of Chinese high-speed economic development, some major mold industry, especially in the automotive, electronics and other industries, provides a good opportunity for the development of precision mold parts, precision mold parts processing industry. In the high speed development of precision mold parts processing industry, yize mould is developing rapidly, has become a domestic most precision mold parts processing factory.

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_236.html， Reproduced please specify. xiaoyunone110

The Basic Structure of Automobile Connector Mold Parts

   The car is not uncommon in this era, economic development promots the development of the industry, now more and more people are selected by car, then the car also need to use a lot of mold parts, The basic structure of automobile connector mold  parts ,let me introduce to you.
   It is said that the car is made up of many mold parts. Now we can say something about the basic structure of automobile connector mold parts .
 its function is very important, can say auto parts are indispensable, the lack of this will not be able to run, so that the basic structure of automobile connector mold parts for auto parts industry also is not little.  With the development of parts of the auto connector mould components, Dongguan Yize mold Limited company, specializing in automobile connector mold parts for20 years, reliable quality, auto connector mold parts fittings all are exported overseas, have certification.
  The four basic structural components for automotive connector
  First, the contact is the core parts of the automobile connector mold parts: complete the electric connection function. In general by the positive contact and the negative contact parts of the contact, Yin, Yang contact piece is inserted to complete the electrical connection.
   Second, also known as shell: shell, is an automotive connector, insulating installation plate and pin provides mechanical protection it inside, and provides a plug and socket alignment inserted timely, and the connector is fixed to the device.
   Third: the insulator, insulator is often called the automobile connector base or a mounting plate , it is the role of the contact according to the position and spacing are needed.
   Forth, accessories and installation accessories. Basic structure of automobile connector mold parts such as rings, positioning keys, the positioning pin, guide pin, a connecting ring, cable clamp, sealing ring, gasket and so on.
   It is these four basic structural components enable auto connector can act as a bridge effect, stable operation.
  The four basic structural components of automobile connector above, And in auto fittings must be selected to use high-quality accessories, or place safe hidden trouble is we do not want to see. The quality of automotive connector mold parts can not miss yize, for the the basic structure of automobile connector mold  parts !

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_232.html， Reproduced please specify. xiaoyunone110

Mold Components Machning

  Mold components machning is always wanting to improve the overall level of mold components,  representative of the products of the high-end equipment manufacturing industry and the power mold enterprises production enterprises with intelligent die, will support Chinese high-end equipment manufacturing areas such as the rapid development of mold components machning. Compared with the traditional mold, intelligent mold with high technical content, high value-added products, long service life, wide application range, advantages such as large market space. The development of intelligent mold, although the amount is not much, but it represents the new development direction of mold industry level of production technology, will play an increasingly important role in the transformation of industry structure adjustment and development mode.
  The development of mold components machning and the development of other industries in China, but also can see the level of mold industry production in China , but in today rapid economic development, Yize mold production industry level also in the development with the production level of our mold components machning and grow up fast.

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_227.html， Reproduced please specify. xiaoyunone110

The Development of Mold Parts

　With the development of mold parts, how to choose the high quality mold parts manufacturers? The general customers find mold parts, will be the first to find high quality mold parts manufacturers, even if the price is higher, yet the quality is guaranteed, so I would rather spend some money to do high-quality mold parts. Today we are going to yize mould to understand the development of mold parts-- yize mold, believe that you will fall in love with mold parts.
　　Yize mold with the development of mold parts ,we have accumulated a wealth of professional experience in technology, marketing and service, affirmation and support of many customers have been evaluation at home and abroad, so the development of mold parts for yize. And mold parts we are using is the production equipment and processing technology of Japanese advanced, for the production of high-quality products, and products are mainly exported to Germany, Japan, Italy, USA, Israel, Singapore, Thailand, Malaysia and other countries and regions. Special color mainly is that we can refer to the world brand standard production, processing, inspection according to the requirements of customers. And in accordance with the national standard GB, Japanese standard JIS, German standard DIN, AISI and so American Standard international industrial standard. Product: precision tolerance of ± 0.001mm, coaxial, roundness within 0.002 0.0015mm, surface roughness Ra0.025, linearity of the 300mm is within 0.002.
　　Read the above content, you fall in love with yize, yes or no? Donot hesitate to choose the high-quality mold parts manufacture, to know the development of mold parts,to choose yize mould.

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_221.html， Reproduced please specify. xiaoyunone110

Precision Mold Parts Industry Manufacture

 With the rapid development of information technology and computer network technology, mold parts industry manufacturing  has entered the new era of globalization. At present, China economic growth continued to slow, fast economic growth stimulating effect on the industry decreased obviously. In the mold parts industry comprehensive transformation and upgrading of the background, green, sustainable innovation,  appearing in the mold parts field of vision, have become keywords to mold parts industry manufacturing  innovation and development. So in the current mold parts industry manufacturing industry comprehensive transformation and upgrading of the background, green, sustainable innovation, made the word more and more appear in the mould people's field of vision, have become the keywords to mold parts industry  manufacturing innovation and development. So precision mold parts processing factory -- Yize mold will also keep up with the development of the times, take the road of sustainable development, and strive for the development of precision mold parts processing.

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_217.html， Reproduced please specify. xiaoyunone110

Good Enterprise Culture, Creating New Tungsten Carbide Mold Parts Processing

As the saying goes: the enterprise is the tree, culture is the root, root depth can be with luxuriant foliage. Since yize mould was founded , we explore various ways of tungsten carbide mold parts processing , deep and lasting culture yize enterprise culture, yize enterprise ecological chain is the corporate culture chain, culture of gas aggregation through each link of enterprise, promote the overall tungsten carbide mold parts processing team. In such a good corporation culture, making yize faster to create high-quality tungsten carbide mold parts, accelerate tungsten carbide mold parts processing. Get preferential, best in the precision of tungsten carbide parts, should be yize all right.
Yize has always adhered to the people-oriented enterprise culture. As we know, the human factor can make the business be on the upgrade, also can make the enterprise the decline. Enterprise vitality root in people vitality, the state of man really created the life of the state. It is by virtue of this healthy, positive enterprise culture, this life margin, round this life yize twist became a powerful force, greatly enhance the core competitiveness of yize tungsten carbide mold parts, and to the development and strengthening of the source, we continue to provide continuous power. Each company will form their own unique value concept, code of conduct, product image, brand image and so on, which is the specific connotation of unique enterprise enterprise. Mental strength is not the same. It is professional tungsten carbide mold parts wholesale manufacturers, price is the most favorable, but this piece known yize tungsten carbide mold parts, price, quality and service and again let yize mold famous.
This excellent corporate culture, let yize tungsten carbide mold parts processing industry friends work together to create a mold industry, work together to create a better quality of tungsten carbide mold parts processing, mold manufacturing industry work together to shape China beautiful images full of pride and fighting style, let us look forward to the future ,to develop yize tungsten carbide mold parts processing and mold in the world industry, believe that will let you be very satisfied.

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_215.html， Reproduced please specify. xiaoyunone110

Which is Best In Ultra- precision Mold Parts Processing

　In today mold industry can be described as intense competition , which is best in ultra- precision mold parts processing in China? Please allowed me to introduce which is best in ultra- precision mold parts processing in China .
   Today our country is catching on economic development, upgrading of industrial structure into the stages of economic growth is the efficient generation and industrial  business expansion , inefficient industries and businesses to offer shrinking increment and post-closure , the competition is a source of efficiency for ultra- precision mold parts processing, in a competitive situation , ultra-precision mold parts processing is improved efficiency. These areas will be improved, but also in precision plastic mold components processing this regard should correspond to upgrade inserts . Although competition may result in duplication of investment and business failures , seemingly wasteful, but the competition will encourage the growth of the high efficiency of enterprises, companies out behind . It continued renewal in order to protect and improve economic efficiency , it is desirable ultra-precision mold parts processing factories have been convinced , just good mold parts, so will only be getting better and better , get more customers for their supports .
　　Dongguan Yize Mold Co.,Ltd. is specialized in ultra-precision mold parts processing, mold components manufacture,we have over ten years of experience in ultra-precision mold parts processing and have been prasied by our customers. With the development of mold industry , more and more ultra-precision mold parts processing is tend to choose best ultra-precision mold parts , so yize mold is doing its best in ultra-precision mold parts processing , not only because we have a large number of ultra-precision machining mold parts processing equipment and experienced personnel. Yize should focus on high-quality manufacturing, technical innovations , when many customers need to find ultra-precision mold parts processing factory , tend to think of first is yize,  because our excellent quality. I believe our long-term cooperation will let you be more like us.

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_219.html， Reproduced please specify. xiaoyunone110

Precision Mold Parts Industry Manufacture

 With the rapid development of information technology and computer network technology, mold parts industry manufacturing  has entered the new era of globalization. At present, China economic growth continued to slow, fast economic growth stimulating effect on the industry decreased obviously. In the mold parts industry comprehensive transformation and upgrading of the background, green, sustainable innovation,  appearing in the mold parts field of vision, have become keywords to mold parts industry manufacturing  innovation and development. So in the current mold parts industry manufacturing industry comprehensive transformation and upgrading of the background, green, sustainable innovation, made the word more and more appear in the mould people's field of vision, have become the keywords to mold parts industry  manufacturing innovation and development. So precision mold parts processing factory -- Yize mold will also keep up with the development of the times, take the road of sustainable development, and strive for the development of precision mold parts processing.

Article from above Yize Official website http://www.yizemoulds.com/， Original Address http://www.yizemoulds.com/news_show_6_28_217.html， Reproduced please specify. xiaoyunone110

Chinese precision mold factory YiZe Hundred Regiments

Explain in detail the internal structure led ceiling light

How disassembly led down light

China Core Pins And Sleeves Still Exist Various Problems

China Core Pins And Sleeves Still Exist Various Problems

   The development of China core pins and sleeves in recent years is on track, so there are all kinds of problems in management mode, China core pins and sleeves is now in such a problem,  then back is a rectification process，the quality and preferential of connector mold parts, mold parts processing to choose yize is all right.
    China core pins and sleeves itself is a branch of mold industry, market scope is not relatively large, so the enterprises in the aspects of product marketing idea wasn't good enough. After a long time of development and improvement,  China core pins and sleeves has made great progress and breakthrough, also harvest the rich achievements, but China core pins and sleeves in the management still exist many problems. Be the first to bear the brunt is marketing level cannot meet the needs of industry.
   Marketing level is not high, extensive management, low efficiency are the three major problems existing in China core pins and sleeves.
      Dongguan Yize Mould Co.,Ltd seizes the chance to develop itself core pins and sleeve,take the core pins market to win the market.To stand on the top of core pins and slleves market.